| AMI UCEP205-14 Pillow Block Bearings | Max operating temperature, Tmax:120 °C; d2:561 mm; b:20 mm; Da max:652 mm; Number of lubrication holes:8; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:18.68 Hz; k:12 mm; Characteristic cage frequency, FTF:0.47 Hz; Dynamic load, C:2,370 kN; |
| AMI UEP207-22TC Pillow Block Bearings | Other Features:Deep Groove | Non-Fr; Min operating temperature, Tmin:-25 °C; Maximum Capacity / Filling Slot:No; Snap Ring:No; Internal Clearance:C3-Loose; Long Description:20MM Bore; 32MM Outs; D:32 mm; Outside Diameter:1.26 Inch | 32 Milli; Weight / Kilogram:0.018; Harmonized Tariff Code:8482.10.50.68; |
| AMI UETBL206-19MZ20CEW Mounted Units & Inserts | A5:37.3 mm; L1:160 mm; B:74.6 mm; H:216 mm; A1:26 mm; T max.:100 °C; L:262 mm; Weight:13.48 kg; d1:113 mm; C:113.36 kN; |
| AMI MUCTPL201W Take Up Unit Bearings | H:98 mm; Designation of open end cover:SCOU207-23; SW:3.97 mm; Z:54.4 mm; L1:225 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:SP206-207/72N-; L:274 mm; S:8.5 mm; Designation of bearing:US207-23G2T04; |
| AMI UEHPL205-16W Hanger Unit Bearings | C0:11.2 kN; Designation of bearing:US206-19G2T04; Weight:0.8 kg; A2:41 mm; T max.:100 °C; Designation of closed end cover:SCC206; H:142 mm; e:19 mm; G:R1/8"; A1:12 mm; |
| AMI MUCTPL207-22RFCW Mounted Units & Inserts | H2:61 mm; A:31 mm; C0:23.2 kN; Dz:100 mm; Weight:4.26 kg; H:120 mm; s1:42.9 mm; Designation of housing:SP208-210/90N-; A5:24.6 mm; SW:4 mm; |
| AMI UEP210-31NP Pillow Block Bearings | A2:37.3 mm; A:29.5 mm; C:12.8 kN; N:11,5mm; T min.:-20 °C; G:R1/8"; Designation of bearing:UC204-12G2; s1:15.5 mm; S:12.7 mm; C0:6.65 kN; |
| AMI UCFB201-8TCMZ2 Flange Block Bearings | L:113 mm; H:102 mm; N2:37 mm; G:M6x1; Designation of bearing:ES206-20G2T04; Designation of housing:T206-; T min.:-40 °C; N1:16 mm; B1:35.7 mm; C:19.5 kN; |
| AMI MUCFPL203B Flange Block Bearings | C0:11.5 kN; A2:32 mm; d:22.22 mm; H3:80; T min.:-40 °C; A:29 mm; Designation of housing:FS305-; A4:22 mm; Designation of bearing:UC305-14G2T04; Recommended tightening torque for set screw:3.7 Nm; |
| AMI UCECH205-14NP Hanger Unit Bearings | T max.:100 °C; A:78 mm; H:89 mm; N:26mm; Recommended tightening torque for set screw:33 Nm; C:72.5 kN; G:R1/8"; B:82.6 mm; s1:41.3 mm; Designation of housing:PE216-; |