No. | Brand | t | r | e | E | D | Z | B | H |
MUCTPL205-16W | AMI | - | - | - | 18 mm | - | 17.5 mm | 27 mm | - |
UCFA206-18 | AMI | - | - | - | - | - | - | 30.2 mm | - |
UEP210TC | AMI | - | - | - | - | 32 mm | - | - | - |
UKFL212+HA2312 | AMI | - | - | - | 10 mm | - | - | - | - |
UCFCX06-20 | AMI | - | - | - | - | - | - | - | 180 mm |
UCFL205-15 | AMI | - | - | - | - | - | 16.5 mm | - | - |
UCECH207-22TC | AMI | - | - | - | - | - | - | 65.1 mm | - |
UCFC211-34 | AMI | - | - | - | - | - | - | - | - |
MUCFCF205-14NP | AMI | - | - | 19 mm | - | - | 30 mm | 42.9 mm | 161 mm |
MUCFPL203B | AMI | - | - | - | - | - | - | - | - |
UEMST206-20MZ20RF | AMI | - | - | - | - | - | - | - | - |
UCFPL206W | AMI | - | - | 41.3 mm | - | - | - | - | - |
UENTPL207W | AMI | - | - | - | - | - | - | - | - |
MUCPPL201-8CW | AMI | - | - | - | - | - | - | - | - |
KHFL210-31 | AMI | - | - | - | - | - | - | - | - |
MUCST206-20TC | AMI | - | - | - | - | - | - | - | - |
MUCT208-24 | AMI | - | - | 24 mm | - | - | - | - | - |
UCECH205-14NP | AMI | - | - | - | - | - | - | 82.6 mm | 89 mm |
UK328+H2328 | AMI | - | - | 10 mm | - | - | 57.7 mm | 49.2 mm | - |
UETBL206-19MZ20CEW | AMI | - | - | - | - | - | - | 74.6 mm | 216 mm |
MUCFT205-16TC | AMI | - | - | - | - | - | - | - | 54 mm |
KHPW205-16 | AMI | - | - | - | - | - | - | - | - |
MUCHPL207-22CB | AMI | - | - | - | - | - | - | 82 mm | - |
UEHPL205-16MZ20RFCW | AMI | - | - | - | - | 130 mm | - | 61.9 mm | - |
UCPH205-16 | AMI | - | - | 25 mm | - | - | - | 55.6 mm | - |
MBFPL8NZCEW | AMI | - | - | - | - | - | - | - | - |
AMI UCFCS210C4HR23 Flange Block Bearings | s1:21.75 mm; Recommended tightening torque for set screw:11.5 Nm; d:50 mm; Z:74.6 mm; Designation of closed end cover:SCC210; T max.:200 °C; Designation of housing:PH210N-; H:110 mm; B:43.5 mm; L:206 mm; |
AMI UC214-44C4HR5 Mounted Units & Inserts | B1:48.4 mm; Recommended tightening torque for set screw:16.8 Nm; H1:22 mm; J:171 mm; A1:40 mm; Designation of housing:P211-; G:M6x1; d:55.56 mm; L:219 mm; H2:126 mm; |
AMI BLF1B Flange Block Bearings | Characteristic outer ring frequency, BPF0:2.62 Hz; B:10 mm; Brand:NTN; Mass:0.04 kg; f0:12.7; Dynamic load, C:6.1 kN; da min:16 mm; Nlim (grease):22,000 rpm; rs min:0.6 mm; ra max:0.6 mm; |
AMI MUCTPL205-16W Take Up Unit Bearings | L1:25 mm; T max.:100 °C; H1:15 mm; d:23.81 mm; N:M10; A:38 mm; B:27 mm; Z:17.5 mm; E:18 mm; G:M6x1; |
AMI UETBL207-20MZ20CEW Mounted Units & Inserts | Snap ring reference:R120; Fatigue limit load, Cu:2.05 kN; D3 max:115.21 mm; d:55 mm; da min:64 mm; Db min:131.5 mm; Characteristic rolling element frequency, BSF:4.08 Hz; rs min:2 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Characteristic outer ring frequency, BPF0:3.07 Hz; |
AMI BR3 Insert Bearings Cylindrical OD | d1:51.1 mm; Designation of housing:EHE207-; G1:M24; H:90 mm; A:32 mm; S:18.8 mm; B1:51.1 mm; C:25.7 kN; Weight:1.31 kg; Designation of bearing:EX207-22G2T20; |
AMI BNFL8CEW Flange Block Bearings | Dz:54 mm; C:10.1 kN; A:25.5 mm; J:64 mm; S:12.7 mm; Weight:0.74 kg; A2:33.3 mm; N:12mm; e:15 mm; s1:15.5 mm; |
AMI MUCTPL207-22RFCW Mounted Units & Inserts | H2:61 mm; A:31 mm; C0:23.2 kN; Dz:100 mm; Weight:4.26 kg; H:120 mm; s1:42.9 mm; Designation of housing:SP208-210/90N-; A5:24.6 mm; SW:4 mm; |
AMI MUCHPL206-18RFCB Hanger Unit Bearings | A5:23.5 mm; G:R1/8"; C:25.7 kN; S:8.5 mm; Designation of housing:SP206-207/72N-; T min.:-20 °C; H2:41 mm; A:21 mm; T max.:200 °C; B:32 mm; |
AMI KHPFT205-14 Flange Block Bearings | H3:70; T max.:200 °C; d:22.22 mm; N:9mm; A2:25.9 mm; G:M6x1; J:90 mm; L:115 mm; e:2.5 mm; S:7.5 mm; |
AMI UKFX13+HS2313 Flange Block Bearings Video