| AMI UEP207-22TC Pillow Block Bearings | Other Features:Deep Groove | Non-Fr; Min operating temperature, Tmin:-25 °C; Maximum Capacity / Filling Slot:No; Snap Ring:No; Internal Clearance:C3-Loose; Long Description:20MM Bore; 32MM Outs; D:32 mm; Outside Diameter:1.26 Inch | 32 Milli; Weight / Kilogram:0.018; Harmonized Tariff Code:8482.10.50.68; |
| AMI KHFL210-31 Mounted Units & Inserts | d:10 mm; Ca max:3.18 mm; Brand:SNR; Fatigue limit load, Cu:0.12 kN; d1:16 mm; b max:1.65 mm; Dynamic load, C:5.9 kN; Snap ring reference:R30; Radial clearance class:CN; f:1.07 mm; |
| AMI BFPL6-18MZ2W Flange Block Bearings | d:20 mm; E:10 mm; A1:19 mm; J:50.8 mm; L1:18 mm; Z:15.9 mm; L:65 mm; A:32 mm; Designation of housing:PAE204N-; T max.:100 °C; |
| AMI UCNST212 Mounted Units & Inserts | B:31 mm; d:12 mm; C0:6.65 kN; Designation of housing:P204N-; Z:16.4 mm; H:33.3 mm; A:38 mm; L:127 mm; C:12.8 kN; s1:15.5 mm; |
| AMI MUCTPL205-16W Take Up Unit Bearings | L1:25 mm; T max.:100 °C; H1:15 mm; d:23.81 mm; N:M10; A:38 mm; B:27 mm; Z:17.5 mm; E:18 mm; G:M6x1; |
| AMI MUCFL206NP Flange Block Bearings | B:42.9 mm; Recommended tightening torque for set screw:8 Nm; Z:48.7 mm; N:16mm; Designation of bearing:UC207-21G2T20; S:17.5 mm; T min.:-20 °C; d:33.34 mm; Weight:1.27 kg; A1:14 mm; |
| AMI UENFL206-18W Flange Block Bearings | Recommended tightening torque for set screw:3.7 Nm; C0:6.65 kN; Designation of bearing:UC201-08G2L4; Weight:0.71 kg; G:M6x1; B:31 mm; C:12.8 kN; Designation of housing:FC204-; H3:62; d:12.7 mm; |
| AMI UEP210-31NP Pillow Block Bearings | A2:37.3 mm; A:29.5 mm; C:12.8 kN; N:11,5mm; T min.:-20 °C; G:R1/8"; Designation of bearing:UC204-12G2; s1:15.5 mm; S:12.7 mm; C0:6.65 kN; |
| AMI UGSAO311-35 Pillow Block Bearings | P:300 mm; Designation of housing:T210-; C:35.1 kN; A2:37 mm; T min.:-40 °C; A5:32.6 mm; H2:83 mm; S:19 mm; L2:16 mm; T max.:100 °C; |
| AMI UEFC210-32 Mounted Units & Inserts | Designation of closed end cover:SCC207; Designation of bearing:US207-22G2T20; J:68 mm; G:M6x1; L1:35 mm; Z:59.9 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; B:32 mm; Designation of housing:PG207N-; |