| AMI UKPX07+HA2307 Pillow Block Bearings | d:35 mm; Designation of housing:C207-; C:25.7 kN; T max.:100 °C; C0:15.2 kN; SW:4 mm; A3:2 mm; Designation of bearing:EX207G2T04; G:M6x1; d1:51.1 mm; |
| AMI BLF1B Flange Block Bearings | Characteristic outer ring frequency, BPF0:2.62 Hz; B:10 mm; Brand:NTN; Mass:0.04 kg; f0:12.7; Dynamic load, C:6.1 kN; da min:16 mm; Nlim (grease):22,000 rpm; rs min:0.6 mm; ra max:0.6 mm; |
| AMI MUCFT205-16TC Flange Block Bearings | Designation of open end cover:SCOE209-45; C:31.85 kN; Designation of housing:PE209N-; Dz:95 mm; J:150 mm; H:54 mm; T max.:100 °C; A:48 mm; N1:29 mm; T min.:-20 °C; |
| AMI BNFL8CEW Flange Block Bearings | Dz:54 mm; C:10.1 kN; A:25.5 mm; J:64 mm; S:12.7 mm; Weight:0.74 kg; A2:33.3 mm; N:12mm; e:15 mm; s1:15.5 mm; |
| AMI MUCHPL204RFCEB Hanger Unit Bearings | F:105 mm; B:32 mm; ras max:1 mm; Mass:0.56 kg; Precision class:P0; Brand:NTN; da min:96.5 mm; d:90 mm; Lubrication hole on inner ring:Non/No; t:2.5 mm; |
| AMI UETBL207-20MZ20CEW Mounted Units & Inserts | Snap ring reference:R120; Fatigue limit load, Cu:2.05 kN; D3 max:115.21 mm; d:55 mm; da min:64 mm; Db min:131.5 mm; Characteristic rolling element frequency, BSF:4.08 Hz; rs min:2 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Characteristic outer ring frequency, BPF0:3.07 Hz; |
| AMI UCECH207-22TC Hanger Unit Bearings | L:249.5 mm; Recommended tightening torque for set screw:22 Nm; Designation of bearing:UCX11G2; N:22mm; Weight:5.48 kg; d:55 mm; Designation of housing:PEX11-; S:25.4 mm; B:65.1 mm; C:52.5 kN; |
| AMI KHFL210-31 Mounted Units & Inserts | d:10 mm; Ca max:3.18 mm; Brand:SNR; Fatigue limit load, Cu:0.12 kN; d1:16 mm; b max:1.65 mm; Dynamic load, C:5.9 kN; Snap ring reference:R30; Radial clearance class:CN; f:1.07 mm; |
| AMI MUCFPL203B Flange Block Bearings | C0:11.5 kN; A2:32 mm; d:22.22 mm; H3:80; T min.:-40 °C; A:29 mm; Designation of housing:FS305-; A4:22 mm; Designation of bearing:UC305-14G2T04; Recommended tightening torque for set screw:3.7 Nm; |
| AMI UCFCX06-20 Flange Block Bearings | T max.:100 °C; T min.:-20 °C; Designation of housing:FLE209-; s1:26 mm; d1:65 mm; N:14mm; A:37.5 mm; J:148.5 mm; Weight:1.9 kg; H:180 mm; |