| AMI UEP207-22TC Pillow Block Bearings | Other Features:Deep Groove | Non-Fr; Min operating temperature, Tmin:-25 °C; Maximum Capacity / Filling Slot:No; Snap Ring:No; Internal Clearance:C3-Loose; Long Description:20MM Bore; 32MM Outs; D:32 mm; Outside Diameter:1.26 Inch | 32 Milli; Weight / Kilogram:0.018; Harmonized Tariff Code:8482.10.50.68; |
| AMI UENFL206-18W Flange Block Bearings | Recommended tightening torque for set screw:3.7 Nm; C0:6.65 kN; Designation of bearing:UC201-08G2L4; Weight:0.71 kg; G:M6x1; B:31 mm; C:12.8 kN; Designation of housing:FC204-; H3:62; d:12.7 mm; |
| AMI MBFPL8NZCEW Flange Block Bearings | T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; L:113 mm; A2:28 mm; L3:57 mm; N:22mm; H1:89 mm; A1:12 mm; s1:15 mm; A:37 mm; |
| AMI UCECH205-14NP Hanger Unit Bearings | T max.:100 °C; A:78 mm; H:89 mm; N:26mm; Recommended tightening torque for set screw:33 Nm; C:72.5 kN; G:R1/8"; B:82.6 mm; s1:41.3 mm; Designation of housing:PE216-; |
| AMI UCP214 Pillow Block Bearings | Fatigue limit load, Cu:0.29 kN; Brand:SNR; Mass:0.07 kg; d:20 mm; D:42 mm; Characteristic inner ring frequency, BPFI:5.41 Hz; Characteristic cage frequency, FTF:0.4 Hz; Max operating temperature, Tmax:120 °C; D1:37.3 mm; ra max:0.6 mm; |
| AMI UCT311 Take Up Unit Bearings | T min.:-20 °C; Weight:2.52 kg; T max.:200 °C; S:11 mm; A:54 mm; H2:106.4 mm; H:52.4 mm; Designation of bearing:ES209-26G2T20; Recommended tightening torque for set screw:8 Nm; J:151.5 mm; |
| AMI MSER207-23 Insert Bearings Cylindrical OD | C0:18.2 kN; N:M14; J:84 mm; T min.:-20 °C; s1:24.6 mm; d:38.1 mm; Recommended tightening torque for set screw:8 Nm; L1:32 mm; G:M6x1; Designation of housing:PA208-; |
| AMI UK328+H2328 Insert Bearings Spherical OD | C:31.85 kN; e:10 mm; A1:10 mm; L:160 mm; Dz:95 mm; Weight:2.55 kg; Z:57.7 mm; N:16mm; B:49.2 mm; Designation of housing:FC209N-; |
| AMI KHR210 Insert Bearings Cylindrical OD | Weight:0.75 kg; N1:19 mm; T min.:-40 °C; Designation of housing:PE205-; C0:7.88 kN; B1:44.3 mm; C:14 kN; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; H:36.5 mm; |
| AMI UCECH207-22TC Hanger Unit Bearings | L:249.5 mm; Recommended tightening torque for set screw:22 Nm; Designation of bearing:UCX11G2; N:22mm; Weight:5.48 kg; d:55 mm; Designation of housing:PEX11-; S:25.4 mm; B:65.1 mm; C:52.5 kN; |