| AMI UEP210TC Pillow Block Bearings | Characteristic outer ring frequency, BPF0:5.62 Hz; rs min:0.3 mm; Nlim (grease):21,000 rpm; Dynamic load, C:4 kN; D:32 mm; Mass:0.02 kg; Static load, C0:2.47 kN; Da max:30 mm; ra max:0.3 mm; Min operating temperature, Tmin:-20 °C; |
| AMI UCST206-18NP Take Up Unit Bearings | Min operating temperature, Tmin:-25 °C; Radial clearance class:C4; f0:14.1; ra max:1 mm; Static load, C0:20.4 kN; Max operating temperature, Tmax:110 °C; Characteristic inner ring frequency, BPFI:5.38 Hz; Nlim (grease):5,200 rpm; Fatigue limit load, Cu:0.93 kN; Mass:0.4 kg; |
| AMI UETBL206-19MZ20CEW Mounted Units & Inserts | A5:37.3 mm; L1:160 mm; B:74.6 mm; H:216 mm; A1:26 mm; T max.:100 °C; L:262 mm; Weight:13.48 kg; d1:113 mm; C:113.36 kN; |
| AMI UCAO309 Pillow Block Bearings | s1:28.5 mm; Recommended tightening torque for set screw:16.8 Nm; G:M6x1; T min.:-20 °C; A1:18 mm; e:25 mm; C0:31.8 kN; Weight:3.4 kg; Designation of housing:F309-; N:19mm; |
| AMI UCECH207-22TC Hanger Unit Bearings | L:249.5 mm; Recommended tightening torque for set screw:22 Nm; Designation of bearing:UCX11G2; N:22mm; Weight:5.48 kg; d:55 mm; Designation of housing:PEX11-; S:25.4 mm; B:65.1 mm; C:52.5 kN; |
| AMI UCNST212 Mounted Units & Inserts | B:31 mm; d:12 mm; C0:6.65 kN; Designation of housing:P204N-; Z:16.4 mm; H:33.3 mm; A:38 mm; L:127 mm; C:12.8 kN; s1:15.5 mm; |
| AMI UKFL212+HA2312 Mounted Units & Inserts | T min.:-40 °C; C:9.55 kN; E:10 mm; A:30 mm; C0:4.78 kN; T max.:100 °C; L1:17.5 mm; S:6 mm; Weight:0.4 kg; J:47 mm; |
| AMI MUCFPL203B Flange Block Bearings | C0:11.5 kN; A2:32 mm; d:22.22 mm; H3:80; T min.:-40 °C; A:29 mm; Designation of housing:FS305-; A4:22 mm; Designation of bearing:UC305-14G2T04; Recommended tightening torque for set screw:3.7 Nm; |
| AMI UENFL206-18W Flange Block Bearings | Recommended tightening torque for set screw:3.7 Nm; C0:6.65 kN; Designation of bearing:UC201-08G2L4; Weight:0.71 kg; G:M6x1; B:31 mm; C:12.8 kN; Designation of housing:FC204-; H3:62; d:12.7 mm; |
| AMI MUCTPL205-16W Take Up Unit Bearings | L1:25 mm; T max.:100 °C; H1:15 mm; d:23.81 mm; N:M10; A:38 mm; B:27 mm; Z:17.5 mm; E:18 mm; G:M6x1; |