| AMI MUCST206-20TC Take Up Unit Bearings | Designation of bearing:ES207G2T20; d:35 mm; S:9.5 mm; C:25.7 kN; B1:38.9 mm; T max.:200 °C; T min.:-20 °C; L:94 mm; A:32.5 mm; Designation of housing:FLZ207-; |
| AMI MBFPL8NZCEW Flange Block Bearings | T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; L:113 mm; A2:28 mm; L3:57 mm; N:22mm; H1:89 mm; A1:12 mm; s1:15 mm; A:37 mm; |
| AMI UETBL207-20MZ20CEW Mounted Units & Inserts | Snap ring reference:R120; Fatigue limit load, Cu:2.05 kN; D3 max:115.21 mm; d:55 mm; da min:64 mm; Db min:131.5 mm; Characteristic rolling element frequency, BSF:4.08 Hz; rs min:2 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Characteristic outer ring frequency, BPF0:3.07 Hz; |
| AMI KHR210 Insert Bearings Cylindrical OD | Weight:0.75 kg; N1:19 mm; T min.:-40 °C; Designation of housing:PE205-; C0:7.88 kN; B1:44.3 mm; C:14 kN; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; H:36.5 mm; |
| AMI UCMFL207-22MZ2 Flange Block Bearings | A1:12 mm; Recommended tightening torque for set screw:3.7 Nm; N:11,5mm; Designation of open end cover:SCOU205-14; T min.:-20 °C; J:82.5 mm; Z:44.9 mm; Designation of bearing:UC205-14G2; S:14.3 mm; s1:17 mm; |
| AMI UCFS319 Flange Block Bearings | S:16.7 mm; SW:3.97 mm; A3:2.5 mm; A:26 mm; H:90 mm; A5:18.2 mm; Designation of housing:C305-; C:22.36 kN; Recommended tightening torque for set screw:8 Nm; d1:42.8 mm; |
| AMI UEP207-22TC Pillow Block Bearings | Other Features:Deep Groove | Non-Fr; Min operating temperature, Tmin:-25 °C; Maximum Capacity / Filling Slot:No; Snap Ring:No; Internal Clearance:C3-Loose; Long Description:20MM Bore; 32MM Outs; D:32 mm; Outside Diameter:1.26 Inch | 32 Milli; Weight / Kilogram:0.018; Harmonized Tariff Code:8482.10.50.68; |
| AMI KHPFT205-14 Flange Block Bearings | H3:70; T max.:200 °C; d:22.22 mm; N:9mm; A2:25.9 mm; G:M6x1; J:90 mm; L:115 mm; e:2.5 mm; S:7.5 mm; |
| AMI MUCTPL202B Take Up Unit Bearings | L:97 mm; A1:12 mm; C0:7.88 kN; s1:13.5 mm; N2:32 mm; L3:51 mm; SW:3.18 mm; S:7.5 mm; L2:10 mm; L1:62 mm; |
| AMI KHPW205-16 Pillow Block Bearings | Bearing Series:209 Series; Bearing Outer Ring Material:Steel; Bearing Duty:Normal Duty; Ring Size:Standard; Housing Material:Polymer; Brand:Baldor-Dodge; Shaft Attachment (2):Set Screw; Self Aligning:Self Centering; Bearing Family:Setscrew Ball Bearin; End Cap Groove:Yes; |