| AMI UCPPL210-32MZ2B Pillow Block Bearings | Designation of housing:SP208-210/90N-; C:35.1 kN; SW:4.76 mm; T max.:100 °C; Designation of open end cover:SCOU210-31; L1:260 mm; G:R1/8"; C0:23.2 kN; T min.:-20 °C; A:31 mm; |
| AMI UCFA206-18 Flange Block Bearings | T min.:-20 °C; J:159 mm; L1:65 mm; Designation of housing:PH210-; G:M6x1; H2:165 mm; C:35.1 kN; C0:23.2 kN; d:50 mm; B:30.2 mm; |
| AMI KHPFT205-14 Flange Block Bearings | H3:70; T max.:200 °C; d:22.22 mm; N:9mm; A2:25.9 mm; G:M6x1; J:90 mm; L:115 mm; e:2.5 mm; S:7.5 mm; |
| AMI UEP210TC Pillow Block Bearings | Characteristic outer ring frequency, BPF0:5.62 Hz; rs min:0.3 mm; Nlim (grease):21,000 rpm; Dynamic load, C:4 kN; D:32 mm; Mass:0.02 kg; Static load, C0:2.47 kN; Da max:30 mm; ra max:0.3 mm; Min operating temperature, Tmin:-20 °C; |
| AMI UG209 Insert Bearings Spherical OD | Designation of bearing:UC203G2L3; Designation of housing:PG204N-; B:31 mm; N:M8; A:38 mm; L:70 mm; H:33.3 mm; J:49 mm; L1:21 mm; Weight:0.58 kg; |
| AMI UCFCX06-20 Flange Block Bearings | T max.:100 °C; T min.:-20 °C; Designation of housing:FLE209-; s1:26 mm; d1:65 mm; N:14mm; A:37.5 mm; J:148.5 mm; Weight:1.9 kg; H:180 mm; |
| AMI KHR210 Insert Bearings Cylindrical OD | Weight:0.75 kg; N1:19 mm; T min.:-40 °C; Designation of housing:PE205-; C0:7.88 kN; B1:44.3 mm; C:14 kN; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; H:36.5 mm; |
| AMI UEFC210-32 Mounted Units & Inserts | Designation of closed end cover:SCC207; Designation of bearing:US207-22G2T20; J:68 mm; G:M6x1; L1:35 mm; Z:59.9 mm; Recommended tightening torque for set screw:8 Nm; A1:27 mm; B:32 mm; Designation of housing:PG207N-; |
| AMI UCHPL204MZ2CEW Hanger Unit Bearings | Min operating temperature, Tmin:-20 °C; Manufacturer Name:NTN; Da max:111 mm; D:120 mm; Static load, C0:233 kN; rs min:2 mm; Characteristic inner ring frequency, BPFI:7.82 Hz; da max:69 mm; Characteristic rolling element frequency, BSF:4.71 Hz; Characteristic cage frequency, FTF:0.4 Hz; |
| AMI UEMST206-20MZ20RF Mounted Units & Inserts | ra max:1.5 mm; Characteristic rolling element frequency, BSF:18.28 Hz; Y2:1.61; d:158.75 mm; Characteristic cage frequency, FTF:0.47 Hz; C:18.26 mm; Nlim (oil):2,000 rpm; r1a max:1.5 mm; Dynamic load, C:126 kN; d1:182 mm; |