| AMI UCST207-21 Take Up Unit Bearings | Z:44 mm; Designation of bearing:EX212G2T04; Designation of housing:FA212N-; e:29 mm; L1:118 mm; C0:32.8 kN; Weight:4.57 kg; A:48 mm; d:60 mm; A1:20 mm; |
| AMI UELF205-14B Mounted Units & Inserts | N:18mm; T max.:100 °C; e:28 mm; T min.:-20 °C; B:51.6 mm; Recommended tightening torque for set screw:16.8 Nm; Designation of housing:FE210-; J:111 mm; L:143 mm; s1:25.8 mm; |
| AMI UENFL206-19MZ20CEW Mounted Units & Inserts | G:M6x1; A:49 mm; T max.:200 °C; N:29mm; N2:49 mm; B:41.2 mm; C:31.85 kN; L3:83 mm; H:117 mm; Recommended tightening torque for set screw:8 Nm; |
| AMI KHFL210-31 Mounted Units & Inserts | d:10 mm; Ca max:3.18 mm; Brand:SNR; Fatigue limit load, Cu:0.12 kN; d1:16 mm; b max:1.65 mm; Dynamic load, C:5.9 kN; Snap ring reference:R30; Radial clearance class:CN; f:1.07 mm; |
| AMI UCNST212 Mounted Units & Inserts | B:31 mm; d:12 mm; C0:6.65 kN; Designation of housing:P204N-; Z:16.4 mm; H:33.3 mm; A:38 mm; L:127 mm; C:12.8 kN; s1:15.5 mm; |
| AMI UCEP205-14 Pillow Block Bearings | Max operating temperature, Tmax:120 °C; d2:561 mm; b:20 mm; Da max:652 mm; Number of lubrication holes:8; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:18.68 Hz; k:12 mm; Characteristic cage frequency, FTF:0.47 Hz; Dynamic load, C:2,370 kN; |
| AMI UEMTB207-23MZ20RF Mounted Units & Inserts | A2:35 mm; L1:87 mm; T max.:200 °C; S:21.4 mm; L:144 mm; d1:62 mm; L3:83 mm; SW:4 mm; Designation of bearing:EX209G2T20; s1:39.7 mm; |
| AMI UENTPL207W Take Up Unit Bearings | A:32 mm; L3:51 mm; N1:16 mm; N2:32 mm; C0:6.65 kN; B1:30.9 mm; A5:13.9 mm; Weight:0.75 kg; L1:61 mm; H1:76 mm; |
| AMI UCHPL207-22MZ20RFW Hanger Unit Bearings | d1:53.9 mm; D:80 mm; F:49.5 mm; da min:46.5 mm; Mass (without HJ ring):0.39 kg; r1s min:1.1 mm; Category:Bearings; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:5.32 Hz; Weight / Kilogram:0.386; |
| AMI MUCHPL207-22CB Hanger Unit Bearings | s1:41 mm; C:113.36 kN; B:82 mm; N:25mm; A:66 mm; Designation of bearing:UC315G2L3; G:M10x1; d:75 mm; Designation of housing:FS315-; T min.:-20 °C; |