| AMI CUCP208-24C Pillow Block Bearings | s1:25.8 mm; C0:23.2 kN; Weight:2.72 kg; S:19 mm; L:130 mm; G:M6x1; d:50 mm; A1:32 mm; Recommended tightening torque for set screw:22 Nm; T max.:100 °C; |
| AMI KHFL210-31 Mounted Units & Inserts | d:10 mm; Ca max:3.18 mm; Brand:SNR; Fatigue limit load, Cu:0.12 kN; d1:16 mm; b max:1.65 mm; Dynamic load, C:5.9 kN; Snap ring reference:R30; Radial clearance class:CN; f:1.07 mm; |
| AMI UEP207-22TC Pillow Block Bearings | Other Features:Deep Groove | Non-Fr; Min operating temperature, Tmin:-25 °C; Maximum Capacity / Filling Slot:No; Snap Ring:No; Internal Clearance:C3-Loose; Long Description:20MM Bore; 32MM Outs; D:32 mm; Outside Diameter:1.26 Inch | 32 Milli; Weight / Kilogram:0.018; Harmonized Tariff Code:8482.10.50.68; |
| AMI UC209-27 Insert Bearings Spherical OD | Radial clearance class:CN; s max:0.5 mm; F:16 mm; Lubrication hole on outer ring:Non/No; Da max:22 mm; Dw:2.5 mm; Characteristic inner ring frequency, BPFI:7.95 Hz; Min operating temperature, Tmin:-20 °C; Nlim (grease):15,000 rpm; Characteristic cage frequency, FTF:0.43 Hz; |
| AMI UCFT203-11 Flange Block Bearings | G:1/4-28UNF; d:22.22 mm; Recommended tightening torque for set screw:3.7 Nm; d1:37.4 mm; m:5 mm; D:52 mm; Weight:0.19 kg; C1:4.3 mm; SW:3.18 mm; C0:7.88 kN; |
| AMI UEP210-31NP Pillow Block Bearings | A2:37.3 mm; A:29.5 mm; C:12.8 kN; N:11,5mm; T min.:-20 °C; G:R1/8"; Designation of bearing:UC204-12G2; s1:15.5 mm; S:12.7 mm; C0:6.65 kN; |
| AMI UEHPL205-16MZ20RFCW Hanger Unit Bearings | C1:11.3 mm; Recommended tightening torque for set screw:16.8 Nm; d:61.91 mm; m:9 mm; B:61.9 mm; D:130 mm; C:36 mm; C0:51.8 kN; S:31 mm; Weight:2.86 kg; |
| AMI BFPL6-18MZ2W Flange Block Bearings | d:20 mm; E:10 mm; A1:19 mm; J:50.8 mm; L1:18 mm; Z:15.9 mm; L:65 mm; A:32 mm; Designation of housing:PAE204N-; T max.:100 °C; |
| AMI MUCHPL207-22CB Hanger Unit Bearings | s1:41 mm; C:113.36 kN; B:82 mm; N:25mm; A:66 mm; Designation of bearing:UC315G2L3; G:M10x1; d:75 mm; Designation of housing:FS315-; T min.:-20 °C; |
| AMI UCFL204C4HR5 Flange Block Bearings | J:50.8 mm; Dz:60 mm; Designation of housing:PAE205N-; s1:17 mm; H:36.5 mm; L:70 mm; A1:21 mm; N:M10; E:12.5 mm; L1:21 mm; |